Hybrid OR room 14

From Bay Area Structural Heart Wiki
Revision as of 20:33, 26 February 2020 by Suddemj (talk | contribs)

Long table top for all procedures.  

Verify necessary ECMO equipment in OR sterile core Pyxis

Shield for Anesthesia


Zeego

  • Move c-arm to patient transport position before bringing any large equipment into the room.  
    • Working position: table rotated 15*.
  • If procedure requires TEE, have echo move into position before bringing c-arm in.
  • Verify monitor elbow in correct position before draping. See photo.


Storz Display

  • ?VIntegration 2- Echo
  • ?VIntegration 1- Anesthesia Vitals
  • ?Camera for monitor person


ITEMS TO BRING:

  • TOGO Cart
  • Hep saline, lidocaine, bupivicaine, protamine, iStat supplies from cath lab 1
  • Cath Packs
  • Staff and MD Lead
  • Small table for defib
    • may already be in OR14.  If not, check OR sterile core or sterile core behind lab 1
  • Long scrub table from end of hall
  • Contrast- if needed


MITRACLIP

  • Structural Cart
  • Plug Cart
  • Baylis
  • Baylis Cable
  • Mitraclip guide and multiple of each size clip.
  • Stabilizer
  • Plexiglass and stabilizer lift
  • IV Pole with at least (2) 1000 mL pressure bags.
    • may need a second pole and set of bags if it is known in advance a second clip is needed
  • Gel Pads
  • Contrast attached to manifold if coronary angiogram to be performed


TAVR

  • ACIST Setup
  • TAVR Cart
  • Structural Cart
  • Plug Cart- can be parked outside the door
  • Delivery System and other vendor specific equipment from store room.
  • Sentinel: Radial board and Verapamil

TMVR

  • Baylis
  • Baylis Cable
  • TAVR Cart
  • Structural Cart
  • Plug Cart
  • Delivery system and other vendor specific equipment from store room