Duo + Octaray/Optrell Lab 5 Pinning: Difference between revisions
From Bay Area Structural Heart Wiki
Created page with "If Drs. Goyal/Tooley want to simultaneously use an Abbott DuoDeca and an Octaray or Optrell in lab 5 we need to change where the duodeca gets pinned. After selecting the appropriate Pruka protocol: Plug a 20-pole boat into Ref Deca and put the following pins into ports 1 through 10 (left side): (1,2,,5,6,,9,10,,11,12,,19,20). Please note, 11,12 and 19,20 are pins 1,2 and 9,10 on the black cable. Plug the following poles into ports 21-30 on the teal accessory block (co..." |
added color coded table |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[File:Octaduo.jpg|thumb]] | |||
If Drs. Goyal/Tooley want to simultaneously use an Abbott DuoDeca and an Octaray or Optrell in lab 5 we need to change where the duodeca gets pinned. After selecting the appropriate Pruka protocol: | If Drs. Goyal/Tooley want to simultaneously use an Abbott DuoDeca and an Octaray or Optrell in lab 5 we need to change where the duodeca gets pinned. After selecting the appropriate Pruka protocol: | ||
| Line 5: | Line 11: | ||
Plug the following poles into ports 21-30 on the teal accessory block (connected to block A on the front of the Pruka Amp) | Plug the following poles into ports 21-30 on the teal accessory block (connected to block A on the front of the Pruka Amp) | ||
(3,4,,7,8,,13,14,,15,16) Please note, 13,14 | (3,4,,7,8,,13,14,,15,16,,17,18) Please note, 13,14, 15,16, and 17,18 are pins 3,4 and 5,6, and 7,8 on the black cable. | ||
Select | Select GOYAL OCTARAY FW DD on pruka | ||
Latest revision as of 18:29, 6 March 2025
If Drs. Goyal/Tooley want to simultaneously use an Abbott DuoDeca and an Octaray or Optrell in lab 5 we need to change where the duodeca gets pinned. After selecting the appropriate Pruka protocol:
Plug a 20-pole boat into Ref Deca and put the following pins into ports 1 through 10 (left side): (1,2,,5,6,,9,10,,11,12,,19,20). Please note, 11,12 and 19,20 are pins 1,2 and 9,10 on the black cable.
Plug the following poles into ports 21-30 on the teal accessory block (connected to block A on the front of the Pruka Amp) (3,4,,7,8,,13,14,,15,16,,17,18) Please note, 13,14, 15,16, and 17,18 are pins 3,4 and 5,6, and 7,8 on the black cable.
Select GOYAL OCTARAY FW DD on pruka
