Septostomy: Difference between revisions

From Bay Area Structural Heart Wiki
No edit summary
 
(24 intermediate revisions by 3 users not shown)
Line 1: Line 1:
An atrial Septostomy is performed in the setting of ECMO when there is a concern that Left Atrium pressures are high due to the Ecmo flow. Generally done in the setting of ECMO. It can be a stand alone procedure if not performed when ECMO is initiated.
[[File:Z-Med_Balloon.jpg|thumb|150px|right|Z-Med Inflation Chart|link={{filepath:Z-Med_Balloon.jpg}}]]
[[File:Valvuloplasty_balloon_volumes.jpeg|thumb|150px|right|Other Balloons Inflation Chart|link={{filepath:Valvuloplasty_balloon_volumes.jpeg}}]]
__TOC__


<br />
An atrial Septostomy is performed in the setting of ECMO when there is a concern that Left Atrial pressures are high due to the ECMO flow. Generally done in the setting of ECMO. It can be a stand alone procedure if not performed when ECMO is initiated.
 
=== Wires: ===
 
==== Open ====


* Amplatz Super Stiff 1cm tip
== Equipment: Daniels ==
* Cordis 260J
* Indiflator
* Naked 3 port manifold for LA pressure
* Sheath , one French size larger then minimum balloon size
* Balloon, size determined via ECHO


==== Standby ====
===* NEW - Baylis Transseptal===
* VersaCross system
*Grounding pad
===STANDBY!===
*SL1 TransSeptal sheath
*Large curve Baylis needle
*Baylis cable


* 0.32 x 260J
*.032 X 260 “J” wire
* Amplatz Extra Stiff
*Amplatz SuperStiff 1cm Tip 260cm


<br />
*5F MPA2


=== Catheters: ===
== Equipment: Spies ==
* Indeflator
* Naked 3 port manifold for LA pressure
===* NEW - Baylis Transseptal===
* VersaCross system
*Grounding pad
===STANDBY!===
*SL1 TransSeptal sheath
*Large curve Baylis needle
*Baylis cable


==== Open ====
*.032 X 260 “J” wire
 
*SuperStiff 1cm Tip 260cm
* 6fr. MPA2
*5F MPA2
* 8.5fr. SL1
===Procedure requires Baylis===
*Baylis generator
*Grounding Pad


===Balloon size determined by MD.===
*Sheath size determined by balloon. Balloon volume listed on Structural Heart Cart, and chart above.
*Have a 22 True balloon on standby for Spies and Daniels
<br />
<br />
 
<hr />
=== Baylis Setup: ===
Approved: MD initials MM/YY
 
[[Category:Procedures]]
==== Open ====
 
* Baylis generator
* Baylis Large curve needle
* Baylis cable
* Grounding Pad
 
<br />
 
=== Balloon: ===
 
==== Open ====
 
*

Latest revision as of 19:40, 11 October 2024

Z-Med Inflation Chart
Other Balloons Inflation Chart

An atrial Septostomy is performed in the setting of ECMO when there is a concern that Left Atrial pressures are high due to the ECMO flow. Generally done in the setting of ECMO. It can be a stand alone procedure if not performed when ECMO is initiated.

Equipment: Daniels

  • Indiflator
  • Naked 3 port manifold for LA pressure
  • Sheath , one French size larger then minimum balloon size
  • Balloon, size determined via ECHO

* NEW - Baylis Transseptal

  • VersaCross system
  • Grounding pad

STANDBY!

  • SL1 TransSeptal sheath
  • Large curve Baylis needle
  • Baylis cable
  • .032 X 260 “J” wire
  • Amplatz SuperStiff 1cm Tip 260cm
  • 5F MPA2

Equipment: Spies

  • Indeflator
  • Naked 3 port manifold for LA pressure

* NEW - Baylis Transseptal

  • VersaCross system
  • Grounding pad

STANDBY!

  • SL1 TransSeptal sheath
  • Large curve Baylis needle
  • Baylis cable
  • .032 X 260 “J” wire
  • SuperStiff 1cm Tip 260cm
  • 5F MPA2

Procedure requires Baylis

  • Baylis generator
  • Grounding Pad

Balloon size determined by MD.

  • Sheath size determined by balloon. Balloon volume listed on Structural Heart Cart, and chart above.
  • Have a 22 True balloon on standby for Spies and Daniels


Approved: MD initials MM/YY

Retrieved from "https://wiki.bayareastructuralheart.com/index.php?title=Septostomy&oldid=2383"