You do not have permission to edit this page, for the following reason:
Free text:
PHILIPS CVX-300 QUICK-START CHECKLIST ==SET-UP== *Plug in CVX-300 and Turn Power Switch ON System will Complete Self-Test (5 minute warm up) (An audible beep will sound indicating the laser system is ready) *Connect Foot Pedal ==OPERATION== *Insert Catheter and Calibrate **Depress the Calibrate button, aim the catheter and 1-2 inches away from the energy detector **Depress the foot switch until the system completes calibration approximately 5 seconds) -The "Calibration Complete" or Cal OK" lamp is displayed *Set the Fluence and Rate Per Physician's Instructions (i.e. 50/50) *Select the "Ready" Mode **Depress foot pedal per Physician's instructions until lesion(s) modification is complete. *Select "Standby" Mode when the laser i or is removed from body. ===After Treatment is Complete=== ==REPORTING== *Record "Pulses Delivered" in log book **Depressing the "Pulses Delivered" button enables the total number of pulses during a procedure to be visible in the display window *Record "Treatment Time" in log book **Depressing the "Treatment Time" button enables the total lasing time of the procedure to be visible in the display window ==TROUBLESHOOTING== *Laser System Will Not Turn ON **Verify power cord connections **Verify interlock plug installed **Verify main circuit breaker is in ON position *Laser Buzzes When Plugged In **Release red emergency button *Fault Codes 1-4, "Service", "Service Laser Soon", "Power Error" **Shut machine OFF, wait 30 seconds, then Turn ON **Call PHILIPS Customer Service @ 800-231-0978 for assistance ==SHUTDOWN/STORAGE== *Turn the Laser System OFF **Disconnect and store the power cord **Disconnect and store the footswitch **Close the catheter connector door **Clean the energy detector's face with alcohol prep **Cover the laser system with the dust cover [[Category:Products]] [[Category:IRProducts]]
Save page Show preview Show changes Cancel
